Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser that works with CAN buses. It is discreet It does not include LED indicators or key fobs, and is concealed in the wiring of your vehicle.
The user can also disable the system temporarily using Transport Mode when renting out their vehicle. This guide will take you through the installation of a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle against hacking, key cloning, and relay attacks. The system is directly connected to the ECU of your car and protected by a pin code that you choose. It is inaccessible to thieves using diagnostic scanners and other modern methods. It is not able to be disabled using circuit cuts.
The system is easy to use, however it is essential to have a an expert installation to ensure a smooth and secure connection to your vehicle's ECU. Installers approved by Thatcham can assist you with the installation and programming of your Ghost system. They can also suggest a tracking or alarm system to complete the protection package for your vehicle.
First, the installer must disconnect the battery to prevent the possibility of airbag deployment and short circuits. Once this is done the installer is able to safely begin work. Basic hand tools are helpful to make precise connections and a multimeter can be used to test the electrical properties and safety. Cable tie and insulation tape are vital to secure connections and ensure that wiring is neat. The Ghost Immobiliser user manual will provide specific guidelines tailored to your model.
It is essential to choose the right grounding spot that is free of any paint or debris during installation. Installers should also make sure that the immobiliser's wires CAN H and CAN L are connected to the proper ECU ports. Based on the model, these wires could require soldering or plugged in. To ensure a stable and long-lasting connection it is recommended you choose a high-quality plug.
Transport Mode can be turned on by the customer once the installation is completed. This permits mechanics or valet parking to use the vehicle, without knowing the pin code. To do this, the customer must hit the button for service on the dashboard five times within 2 seconds. After that the system will verify with 5 indication signals.
The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's a great option for those who rent out their vehicles regularly through platforms like Turo. An immobiliser can cut down on insurance costs, since it reduces the risk of theft.
Getting Started
If you're looking for a solution to protect your vehicle from thieves, you can't go wrong with an autowatch ghost immobiliser . It prevents your car from running even if someone steals or copies your key. It's possible because of its advanced technology that prevents the engine from starting until the correct PIN code has been entered.
The device connects to the vehicle's bus network CAN which allows direct communication with the ECU. It makes use of the buttons on your dashboard and steering wheel to create a unique sequence which only you are aware of. This makes it impossible for anyone else to start your car. This is the most secure way to safeguard your pride and joy. It will keep its value intact should you ever decide to sell it.
Installing an immobiliser from Ghost is simple, but you must follow the instructions to avoid electrical issues and system malfunctions. You'll need to find a 12V power source and a good grounding on the car's chassis. Then, you'll be able to begin connecting the wires to the immobiliser. Make sure you use top-quality connectors and soldering techniques to ensure a solid connection. Also, make sure to cover the connections by using heat shrink tubing or insulation tape to shield them from short circuits in electrical power and other problems.
Once the wires have been connected, you can connect the battery and start the engine to determine if the immobiliser is working. When everything is functioning correctly then you can put it in a secure location under the dash or somewhere else in the vehicle. Make sure to hide it in a secure manner to prevent thieves from getting into it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified This means it meets the highest standards of security and is a fantastic protection against car thieves. It is a superior defense against key cloning, hacking, and relay attacks, and isn't able to be disabled unless you know the code. The device is simple to use, and it can be set to a service valet setting so that your vehicle will not be activated if you bring it for an MOT or servicing.
Wiring
The Ghost Immobiliser, a cutting technological security system, has been designed to prevent vehicle theft. It communicates with your vehicle's ECU and directly connects to its CAN bus. Ghost Immobiliser doesn't interfere with your vehicle's factory settings, unlike other aftermarket systems which require the removal of circuit elements.
The system is also inaccessible by thieves using scanners for diagnostics. This is due to the fact that it does not transmit and receive radio frequency signals, and it utilizes the CAN data to communicate with your ECU. Additionally, it doesn't require any modification to your vehicle's existing key fobs.
Enter your disarm sequence (either two or one buttons) and then turn on the ignition of your vehicle to use Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. After this, you can start your vehicle and leave with peace of mind.
Once installed, Ghost Immobiliser protects your car against key cloning or hacking while preserving its value. If you ever have to hand over your vehicle to a valet or service provider The Ghost Immobiliser will be temporarily disabled in Transport Mode.
You'll require a continuous power source (12V) and a grounding source to complete the installation of the Ghost immobiliser. Make sure that both are well-insulated and able to be touched. It is also recommended to use cable ties to tie and secure the wires, since this will reduce the risk of being tampered with by thieves. To avoid committing mistakes, double-check these points and mark them with labels or tape. It's recommended to check all connections for signs of wear and tear. Connections that are loose can cause problems with the system, so be sure that they're firmly in place and properly insulated. Make sure to test your Ghost Immobiliser after installation has been completed. This will confirm that the unit is working properly and that all connections and insulation are secure. If there are any issues, make sure to resolve them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that seamlessly into your car's ECU to prevent unauthorized engine start. Its innovative technology safeguards your vehicle against hacking and key cloning along with other methods commonly used by thieves to steal cars. The Ghost is a perfect complement to existing alarm and tracking systems to provide the most effective security for your car. The Ghost's unmatched features, coupled with its discreet design makes it a sought-after choice for drivers who love cars and security-conscious drivers.
To ensure the proper integration of the Ghost Immobiliser, it is essential to follow all steps of the installation procedure. A good starting point is to refer to the vehicle's wiring diagram, which will serve as a guideline to locate and connecting the necessary wires. The next step is to identify the power source and grounding points. Once you have located them, you'll need to mark the points so that they are easy to locate during installation. In addition, it is important to use top-quality tools and materials. Basic hand tools will aid in making precise connections. A multimeter will check electrical values, and ensure security. Insulation tape and cable ties will help keep all connections neat and tidy. Finally, a user manual will give specific guidelines tailored to your Ghost model.
Before you begin installing, it's important to test the system by entering the PIN code and then starting the vehicle. This will ensure that the immobiliser is working as intended, preventing unauthorised vehicle start-ups. This step should be performed regularly as part your regular inspections of your vehicle to ensure that the system is always working correctly.
After the installation is completed, you can begin driving your vehicle with confidence. The Ghost will help keep your precious possessions secure from thieves who might steal it and ensure that no one can take off with your vehicle without the correct PIN code. The Ghost can be used in conjunction with an approved Thatcham tracker that detects any attempts to steal or tamper with. This will allow you to track your car in the event that it's stolen.
The Ghost can be used in a variety of vehicles and is compatible with most major brands. Monty's Locksmith can assist you in securing your vehicle with this cutting edge device. Contact us today to learn more about our service and installation options. We are a TASSA Installer who is registered, a certification that guarantees that we adhere to strict guidelines and procedures for installing our products. This reassures customers, insurers and law enforcement agencies that all installations are performed safely and in a correct manner.