How to Install a Ghost Immobiliser
Ghost immobilisers protect your vehicle from key cloning and hacking. It works by stopping the vehicle's engine from starting until it is started with the PIN code, which can be up to 20 characters in length.
It is undetectable by thieves and they are unlikely to think about this additional layer of security. Certain systems come with an app that allows the owner to deactivate their immobiliser if they forget their PIN or use the service/valet mode.
Connecting the vehicle's CAN Bus to the vehicle's
The Ghost 2 Immobiliser, a cutting edge security system, can be integrated directly into the ECU of your vehicle. It offers a discrete barrier against thieves. It is highly effective and user-friendly and is a great option to add to your vehicle's security arsenal. However, like any anti-theft device, it is not foolproof and requires regular maintenance to ensure its operation. Luckily, this guide will assist you in getting the most out of the Ghost 2 Immobiliser.
CAN (Controller Area Network) is a robust serial network that allows microcontrollers to communicate with one another over short distances without the need for central control units. It is designed to multiply electrical wiring in vehicles, saving on copper. It offers many advantages, including low cost and easy use.
In modern vehicles in modern vehicles, the CAN protocol is used to communicate with various systems, including the engine management system (EMS), steering module, transmission controller, air conditioning controls and many more. It also carries sensor data including speed sensors and inputs to control various features of the vehicle. The CAN bus can be used to monitor the health of these various components and can stop the vehicle from starting if it's in a dangerous condition.
While the CAN bus could be employed for a variety purposes, it's crucial to understand how it operates and how it's secured. It's possible to add new features to a vehicle by using CAN bus, but it's important to secure it from attacks from hackers and other dangers. Installing a firewall, and monitoring your CAN bus with software is the best way to achieve this.
Ghost2's control device is hidden within the car's dashboard or wiring harness, preventing a thief from physically tampering it. It is also impossible to reset a PIN or emergency code without access to the car.
You can turn on Transport Mode if you need to surrender your vehicle for service, valet parking or for any other reason. This feature disables both the keyfob and ignition functions of the Ghost immobiliser. It will only reactivate when the vehicle has reached 31 mph for a period of 15 minutes.
Creating an PIN code
The Ghost immobiliser protects your car from thieves. The latest technology utilizes the PIN code to disable the engine and block it from running without the correct code or a valid fob or mobile device. The system's discrete design makes it virtually invisible and offers unrivaled protection against theft. The system is TASSA certified and could save you substantial sums on your car insurance.
During installation during installation, the Ghost system goes into an learning mode that records the sequence of buttons pressed to create your unique pin code. The installer will guide you through activating the system once the pin code has been created. Once activated, the Ghost system will shut down the starter motor of your vehicle until a valid PIN has been entered or the vehicle is switched to transport mode. This makes it difficult for thieves or cloners to hack into or clone your vehicle's starter system.
It's easy to set up an easy-to-install Ghost immobiliser, however, you must follow the specific instructions in the user's guide to ensure proper performance. Multimeters and basic hand tools can be used to check electrical values. Insulation tape and heat shrink tubing can protect exposed wiring, while cable tie-ups are crucial to keep everything tidy and secure. Be sure to check the system frequently to spot any issues or potential errors.
It is essential to check the system one final time before turning on the ignition. The Ghost immobiliser will be able to rearm itself after a period of 3 to 30 seconds, based on your vehicle model. The system also comes with a Service/Valet mode that lets you temporarily remove the system for servicing or valet parking.
Ideally, the immobiliser should be placed in an inconspicuous location under the steering wheel or on the dashboard. It is recommended to use a small bit of duct tape or paint to mark the CAN H and CAN L wires to ensure that you easily find them during testing. Additionally, the CAN H and L wires should be connected to a source of power that provides continuous 12V. It is crucial to verify the connections after testing as incorrect identification of these wires may cause system malfunction.
Invoking the system
A ghost immobiliser prevents your vehicle from starting unless you press a series of buttons inside the car typically the steering wheel, door panel, or central console. The sequence can be changed by the user at any time. Once the system is activated, it cannot be deactivated by thieves and is a great option for anyone looking to protect their vehicle from theft.
The system is designed to be undetectable, which means it can't be detected by modern diagnostic tools or code-grabbing technology. ghost immobiliser and tracker does not send out radio frequencies, which makes it even harder for thieves to detect the device.
If the device is identified, it will stop the engine from starting and sound an alarm with a loud sound to scare off thieves. The device can be used to monitor the location of the vehicle and help police recover it in the event of theft.
If you're interested in a ghost-immobiliser, contact the experts at Car Specalist Customs to get an estimate and discuss your options. We are fully certified to install a ghost immobiliser on your vehicle, and will make sure it is hidden in a remote area. We can also provide additional security measures such as a wheel lock and kill switch to help keep your car safe from thieves.
Disarming the System
If you have a Ghost immobiliser installed to your vehicle, it's essential to know how to disarm it. It can be used in case you forget your keys or your car battery dies. The system uses an unique PIN code, which only you are aware of. It will not start the car without this code. The most efficient method of entering the code is to press a set of buttons on your dashboard or steering wheel. This is a far simpler method than using the key fob and also stops anyone from copying your remote.
Ghost2 isn't intrusive unlike other immobilisers from the aftermarket that require cutting wires for installation. It also integrates with the CAN bus system of your vehicle to function. Its most notable feature is its ability to bypass the engine without affecting your vehicle's normal functions, making it difficult for thieves to use signal boosters or duplicate your car key. It does not emit radio frequency, so thieves are unable to detect it.
The Ghost system has the option of a Transport Mode that lets you temporarily disable security for situations such as transportation or service. This feature is an excellent option if you want to lend your vehicle to a person who isn't sharing the PIN code or in case you want to secure your vehicle while driving it. To activate Transport Mode you need to press the service button five times within a period of 2 seconds. The Ghost system will confirm activation via five indication signals.
When you're done, remember to save the emergency code in a safe place away from your vehicle. In the event that you find yourself locked out of your vehicle, contact the technician or the company who installed the system, and they'll give you the code. If you are unable to contact them, you can call an authorized dealer. However, this might require verification procedures and you could be charged additional fees.
Apart from the ease of this system, you can depend on it to safeguard your car against theft and help reduce the cost of insurance. Many insurance companies offer lower monthly premiums, or even financial incentives to install this anti-theft device.